Translate

Showing posts with label Heat Embossing. Show all posts
Showing posts with label Heat Embossing. Show all posts

Wednesday, 6 May 2015

A Card Share - Instructions on request ;)

Hello crafty peeps and welcome to my crafty nook! I hope you're all well and enjoying the lovely spring weather. My kitchen is progressing well but we still haven't got round to decorating - to be honest we haven't even bought the paint yet!

My niece is coming to stay on Friday for the weekend  to do a little last minute studying (and crafting) before her exams start on Monday. I've made her a 8" square card to wish her good luck using one of the new Simply Gorjuss stamps I treated myself to last month from Create and Craft. If anyone is interested in how the card was made please email/message me and I'll post a step by step tutorial at a later date. In the meantime I'd like to share a few photos with you.

Good Luck Card for Charlie

Close Up Of  Decoupage Simply Gorjuss Image

Close Up Of Flowers Made With Tim Holtz Tattered Florals Die

Another Close Up


Decoupage Card with Heat Embossed Card Base and Distressed Paper

Yet Another Close Up!

Close up of Decoupage Image (again!)

Another Close up of Tattered Floral Flowers 

I hope you like my latest creation, I'm just hoping it's agreeable to Charlie! I've a couple more cards to make and a couple of internet orders on their way so hopefully I'll be adding a new post soon. As always if you have any questions or comments, please leave them below or contact me on Facebook - just click on the badge in the sidebar. Until next time - keep crafting!

Love and crafty hugs,

Sarah xxxx

Sunday, 26 April 2015

Tool Time Bookmark

Hello crafty peeps and welcome to my crafty nook! I hope you are all well and enjoying this lovely spring weather, I've been avoiding it indoors as everyone seems to be cutting their grass at the moment and its playing havoc with my hay fever, still it's nice to view it through panes of glass lol. I haven't been up to much crafting this week as I'm still dealing with the kitchen, it's amazing I managed to empty it overnight but it's taking WEEKS to put everything back. I blame this on my desire to have things perfect and to be honest my lovely husband's unthinking sabotage, every time I get one area sorted he comes along and wrecks it! It is really disheartening and exhausting to keep cleaning the same areas repeatedly. Moan over (for now anyway lol)

I decided to have a little break yesterday and made a bookmark using the Tool Time die set I mentioned in the last post (I knew it would be a good investment!).

Kraft card Tool Time bookmark

I have a folder of scraps of kraft card stock so I used one of them to use as the base of the bookmark. I carefully lined up a labels shape die near the top of the bookmark and secured it with washi tape so it didn't shift while cutting and then I lined the cutting plates of my Sizzix Big Shot so that the top edges were on the middle section of the die then ran it through my machine. Because the cutting plates don't cover all the die it means it isn't subjected to the pressure that the covered areas of the die are and I got a partial cut (the photo below shows this flap more clearly). I removed the tape from the die and using a eyelet setter and punch added a gold coloured eyelet to the point of the flap (as shown). I die cut all the pieces I needed using scraps of kraft card and the MFT Tool Time die set. I covered the parts of the tools I wanted to look metallic with Versamark ink and silver embossing powder then I heat set it using a heat gun. The handles were coloured using markers and the tools were assembled using Dovecraft pearl effects in clear (fantastic adhesive even if it's not designed as one). It's important to use a strong adhesive to any surface that's been heat embossed because the embossing powder contains wax and a lot of glues just slide off. I used the same 'glue' to fix the tools onto the bookmark.

Bookmark with page 'grabber' open

A bookmark maybe a bit 'old hat' in these days of Kindles etc but I'm intending on including it with a book for someone's birthday, the book is a wood workbook so I thought the tools were a cute addition to the bookmark. The 'page grabber' at the top of the bookmark means that even if you shake the book or accidentally drop it, it should still mark the place you want saving. I really enjoyed making the bookmark, it's a quick gift idea that's thin enough to include in cards without adding too much bulk so I think I'll be making quite a few more especially for Christmas - and for those with electronic books I'll just have to buy a real book for them to read. lol.

I hope you've enjoyed reading this post and if you make a bookmark yourself, I'd love to see them. As always if you have any comments or questions then please leave them in the usual places. Until next time - keep crafting!

Love and crafty hugs,

Sarah xxx

Tuesday, 4 November 2014

Woo Hoo - I beat my crafter's block!!!

Hello crafty peeps - welcome to my crafty nook! For the last few weeks I've been trying to finish the card component of the National Papercrafter of the Year Competition. I tackled the project first assuming that it would be the element I'd struggle with most as I'm a cardmaker and scrapbooker (an infrequent one at that!) rather than someone who makes lots of mini books and home decor items. For some reason I had no trouble with the project but really struggled to come up with card ideas that weren't baby related. I had the dreaded crafter's block!  Maybe because the closing date is Friday but something clicked yesterday and I've been up all night putting the finishing touches to the two cards I'm submitting to the competition. Of course as they are wont to do when I'm up against the clock, lots of things have gone wrong with the cards which is why I pulled an all nighter - the most annoying was deciding Tea Dye distress ink would look better inside the card if I did second generation stamping only to not have enough ink left on the stamp to give a complete image - argh!

Coffee & Cream themed card using Katy Sue Designs Simpler Times Coffee Time stamp set 
This first card is a lot more embellished then I'd normally make and I may have gone a bit overboard with the paper and silk flowers. I've also used paper doilies something I've avoided up to now as they always look a bit daft on my cards like they don't belong there. However I really wanted to have a brown and cream colour scheme for this card and the doilies were a way to introduce the cream part in a decorative manner. I coloured the main stamped image using shades of brown Pro-Markers (the skin was done in putty and tan), the parts of the image that appear red were coloured in using terracotta pro-marker. Once the image was coloured I cut round it using a circle template, I had hoped to use a Sizzix circle die but it wasn't quite large enough. I looked through my flowers and picked out ones that I could colour using Pro-Markers and ended up with a mixture of silk and paper flowers. The silk flowers were extremely easy to colour - the paper ones took more effort but I like the way they turned out. I cut a sheet of 8" x 8" paper down to 7" x 7" and blended some walnut stain distress ink round the edges. I wanted to introduce cream into the design using a doily but all the ones I had were either far too small or just a bit too big, so I decided to use four small ones behind my main image, I stuck them down on the backing paper using Anita's Sticky PVA Glue. I added the main image to the centre of the doilies then arranged the cream and brown flowers round it. I used a hot glue gun to stick the flowers down once I had them how I wanted them. I had loads of glue strings from the glue gun and one of them landed on the backing paper, when I tried to peel it off it took the top layer of the design off so I found some brown ribbon and added a strip across the rip and made a bow out of a second length. Both were stuck down using red liner tape. I felt the design looked unbalanced at this point so I added some more brown ribbon at the opposite bottom corner, unfortunately I didn't use a long enough piece and you could see the frayed edge so I layered a lighter shade of brown ribbon on top and added some flat backed clear gems to the top ribbon. I added loads of red liner tape to the back of the panel and stuck it down on an 8" x 8" scallop edged card blank. I then messed up the stamping (see above!) and ended up cutting the front of the card off and adding it to a panel of kraft card cut to 8" x 9" and scored at 1" in to make a hinge to stick the front panel onto. I stamped the image inside using tea dye distress ink and added a "Warm Wishes" sentiment from the stamp set.

Tatty Button Rainy Days side gatefold card
This second card is probably my favourite and uses Creative Expressions Tatty Button stamps and lots of clear embossing. I stamped the image onto the card blank and made a mask for the image using Post It notes. I coloured the sky using distress inks and splashed droplets of water on it to make rain. The image and grass were then coloured in using Pro-Markers. Once completed I clear embossed the brolly, water drops and the puddles using an embossing pen and clear powder. The black background was stamped using a chevron design stamp and black holographic embossing powder. I cut a chevron patterned piece of paper to the required size and smeared embossing ink all over it and then embossed it using the clear embossing powder and a heat tool. I love the way this panel looks as it's like plastic. I mounted this onto black card and then added a threaded red button. I scored a piece of cardstock into the two panels and threaded some waxed black cord through the widest side. I covered this up with the stamp image raised slightly using black foam tape.I adhered the smaller panel on the right hand side using red liner tape. I tied the waxed cord round the button to make a closure.

Inside panel stamped with Tatty Button stamp and Kaisercrafts Stamp

I stamped the sentiment out onto white card using Versamark ink and sprinkled various embossing powders over the words allowing some of them to mix. I then heat set the powders before mounting the panel onto black cardstock. I stuck this to the right hand side of the inside section of the card then stamped the umberella image on the left hand side using Memento London Fog ink.

It's taken me almost as long to write this blog as it did to make the cards! lol.

I'll be taking my complete entry into the post office today so I hope you'll all keep your fingers (and toes!) crossed for me.

That's all my crafty news and share. If you have any questions please leave a comment below and until next time - keep crafting!

Love and crafty hugs,

Sarah xxx

Card for Isobel

Hello crafty peeps - welcome to my crafty nook! I would like to share with you the "welcome" card I've made for Isobel.

Little Star Welcome card for Isobel

I'm rather pleased with this card and of all the baby cards I've made in recent weeks it's got to be my favourite. I started off stamping a Baby on A Cloud stamp (can't remember who it's made by - sorry) using Memento Tuxedo Black ink onto 300gsm coated white card stock and while the stamp was out I stamped it onto a large post it note to make a mask. This stamp has a very thick outline so I cut it on it rather than just inside it to make the mask ready for some Distress Ink blending. I covered the stamped image with the mask and blended three Tim Holtz Distress inks all over the A6 card (I have a ready cut stock of A6 card so I can stamp as I want to and I renew this as it gets low.) I started with "stormy skies" and blended it all over the card being careful around the top of the mask as it didn't have any sticky on it. Then I added "chipped sapphire" and blended the two colours together until there was no blender marks - I really need to get my hands on the new round blenders. Finally I added "black soot" round the edges and blended it into the centre without adding more ink. I heat set the ink and tested the card surface with embossing powder to make sure it was dry enough to heat emboss without excess powder sticking to the surface (to test if a surface is dry just pour embossing powder over it and if loads stick you'll need to heat set it or use an anti static bag) Unfortunately I tested mine over the middle of the card and not the edges so some powder did stick, however it's a happy accident because I love the way it turned out! I got three magazines today through the post and one of them had a star stencil as it's cover gift. I used this stencil and an embossing ink pen to draw the stars then I added pinpoint dots all over the background (at this point the baby mask remains on the image) and sprinkled the card with Do-Crafts silver embossing powder which I melted with a heat tool until the  powder turned opaque and silver. I removed the paper mask from the image and once I shook out the embossing powder that had gathered inside I coloured the image using Pro-markers. I stamped "Little Star" from Fancy Pants Welcome Little Star stamp set on top of the clouds but it was really hard to read so I stamped over it using clear embossing ink and heat set silver embossing powder on the words. In all honesty it looked a complete mess so I stamped the baby image again, coloured it using Pro-markers, stamped the sentiment in clear ink and heat embossed using Rangers Blue Pearl embossing powder, then I fussy cut the image out. I added black foam tape to the underside and stuck it over the original image. I found the metal Lil Charms embellishment in my stash and attached  to the top part of the card with more of the black foam tape. Finally I stuck the whole card piece to a Papermania pink A6 card blank. I stamped "Welcome" inside and a sprinkling of stamped stars (also from the Fancy Pants stamp set) in the four corners of the inside panel. I also stamped these stars onto the outside of the envelope.

I've a few more cards I'd like to share but that's for the next blog post, so until then - keep crafting!

Love and crafty hugs,

Sarah xx