Translate

Sunday, 28 October 2018

A tiny card share.

Hello my crafty friends. Sorry it's been nearly a month since my last post, my crudy is in an awful state still and I can't really craft in there so I've just not bothered to make anything. I even resorted to a card from my stash for one neice's birthday and I used a printed topper for my other niece who's birthday was yesterday. I'm going to share this second card with you today.i added the printed topper onto some trends Centura Pearl card from Crafter's Companion. I added this to a square card blank and went around the outside of it with Dovecraft's star confetti glitter glue. If you've not come across Dovecraft's confetti glue you should keep an eye out for it as it's a rather unique product. It comes in a selection of colours and shaped confetti, the one I used on this project was iridescent glitter and silver stars but others ones in my stash include red glitter and hearts or silver glitter and mixed snowflakes. It's a bit tricky to use as most glitter glues are (unless you are just highlighting an area) because it doesn't go on smoothly, the bottles have wide mouths which act like a spatula but it's still a messy job to get the confetti in an evenly spaced layer. I finished the card by adding CC clear shimmer pen over the balloons. It's not my best card but at least I haven't resorted to buying one lol. I'm writing this up on my phone so the photos will follow after the text and the paragraphs will run into one (do not ask me why it does that!) Hopefully it won't be as long between blog posts. As always if you have any questions or comments please leave them in the usual places and until next time - keep crafting! Love and crafty hugs, Sarah xx

Thursday, 4 October 2018

I won a prize!

Hello crafty peeps and welcome to my crafty nook! I hope you have had a good week - isn't it crazy that it's October already, it doesn't seem like five minutes since August began. Things have been busy here in my crafty nook with a lot of the dreaded housework being done (and redone several times!) and my crudy has been half emptied ready for yet another inspection being done which makes it 9 in the past 12 months though I am including the work resulting from one of the inspections as it caused a lot of disruption and stress. Hopefully this one and the one in two weeks will be the last of them for a while and we can get back to normality. As annoying as this all is there will be a positive outcome out of it, as about half of my stash is now in the lounge I'm planning on giving my crudy a thoroughly good clean then I'm going to go through my stash to see what I can donate or pass out to my young nieces. I know for a start that I have a Care Bears stamp kit unused in my stash that I'm sure my nieces would love to play with, I think I have a couple of others in my stash too along with a sticker maker which I've never used (in a huge box which takes up a considerable amount of room!) The more stuff I can rehome will have mean I have more room for new stuff! Which is a good thing because I have an Every Craft's A Pound order coming Friday - I should point out that a number of items are either Christmas presents or to be put away for next Easter (ooh aren't I organised!) Even with the presents to take into account I'm still going to need to make some room for my new goodies. Some new goodies I got recently was a lovely envelope of yumminess from Making Cards & Papercraft magazine - they recently had a question on their Facebook page and the best answers will be printed in their magazine, my answer was chosen as the best one (FYI, in the private message the answer was described as being informative and insightful *proud face*) my prize is a huge selection of items from Dovecraft's Christmas Village collection including papers is in 12"x12" and 6"x6", a decoupage stack, felt embellishments, stamps and matching dies and even gold coloured bells. I felt very inspired by the collection and it came at just the right time too because I wanted to make something using Trimcraft products so I could apply for the DT callout which closed on the 30th September. I made an acetate easel shaker card using the 6"x6" papers and one of the cute images from the decoupage pack and added some chunky gold glitter to make it into a shaker card. My second project using the collection was a set of 4 mini Christmas crackers, they don't have snaps in them because the ones I have were much too long so I added a couple of the bells to each one with some Baker's twine from my stash. I'm writing this on my phone so apologies for any typos that happen after the fact (some times words change for no reason) and for the fact there isn't any paragraphs - my phone likes to eat them! As always if you have any questions or comments please leave them in the usual places and until next time - keep crafting! Crafty hugs, Sarah xx xx

Sunday, 23 September 2018

Cardmaker of the Year 2018 Competition Entry.

Hello crafty peeps and welcome to my crafty nook! I hope you've all had a great weekend, it's not been too bad here but you can tell the seasons have changed and there's a bit of a nip in the air especially in the morning. I hope whatever the weather, you've managed to get some crafting done. The closing date for the CMOTY competition was the 14th September which was a good week or so ago and I think it's about time I shared the three cards I sent in as my entry. I'll be quite honest with you, I was in two minds about entering the competition because although I had a lot of ideas and had made a few things towards the cards, I didn't really have anything completed before Jinx fell ill then passed away. As you will know his death has really hit me hard and I've not felt up to doing much apart from housework (mindless distraction)which is pretty much a reversal of my usual inclinuation. Making a wedding card for our neighbours gave me the creative jolt I needed and I liked the card I made so much I decided to replicate it as one of the three cards needed, two thirds of the second card was diecut out and just needed assembling, once those two cards were made I just needed to come up with a third card. After a lot of failed attempts I finally decided to make an acetate flip circle card using the dies my lovely husband bought me for Valentine's Day this year. I love making acetate cards and after a quick internet search failed to come up with any acetate flip circle cards on Pinterest etc I decided to have a go at making one. I will say that acetate can be quite challenging to work with, it doesn't diecut smoothly and you get white lines where you score but I still think it gives a card a real wow factor especially when teamed with kinetic elements. I wanted to deliver a more professional entry this year so made bespoke envelopes for each card and a matching tag in an attempt to stand out from the other entries - I don't know if I've succeeded and I probably haven't even placed but I'm rather proud of myself for even entering at a very challenging time. Anyway enough blathering, as is the norm at the moment I'm adding this blog post using my phone so the photos will appear after the text and all the paragraphs I've stringently added will vanish without a trace once this post goes live so apologies for that. Hopefully the photos will be consecutive and not mixed up like they have been the last couple of posts. As always if you have any questions or comments please leave them in the usual places and until next time - keep crafting! Love and crafty hugs, Sarah xxxxxx

Wednesday, 19 September 2018

Copper Wedding Anniversary card share

Hello crafty peeps and welcome to my crafty nook! Sorry it's been a while since my last post, Chris and I celebrated our 7th wedding anniversary last week. Chris bless him came down with a head cold the weekend before which I hoped I'd avoided only to wake up on our special day feeling dreadful. In one way I've been quite fortunate because the initial cold symptoms only lasted for a day or two (yay for avoiding turning into a snot goblin!) Instead I've just had a hacking cough which is worse at night so I've not had a lot of sleep for the past week, not only does it keep me from going to sleep but I wake up a few hours later needing to cough up stuff - sorry to be gross, sharing is caring lol. Upshot is I'm exhausted and in a lot of pain so I've not done a great deal of crafting even though I really want to, I just don't have the energy right now. I did manage to get a couple of cards made, the first was an anniversary card for Chris, the second was an anniversary card from Chris - yes you read that right, because he started with man flu on the Friday before our anniversary and he always leaves things to the last possible minute, my beloved husband didn't have a card for me on our anniversary so rather than go without, I made my own for him to sign. I didn't mind too much because Mixed Up Craft shared a reverse easel card on YouTube and I thought it would look pretty cool made out of acetate. I wanted to make him a card with a copper heart and that's what I ended up making him though there were a few trial runs first before I settled on the version shown later in the post. I tried wrapping copper wire around a black chipboard heart but it looked dreadful, I tried painting diecut hearts using metallic copper SparkleIT Brusho powders but even when dry the resulting paint is highly water reactive and I couldn't get it to form a smooth layer of colour so that was another idea out the window. I then decided to cover a thick diecut heart (I layered 8 diecut black hearts together to make an extra thick heart) with copper embossing powder and heat set it to make a copper heart embellishment which is what I ended up using. It took about four layers of embossing powder to get a smooth finish and I'm not totally happy with the results because there are dips where I held it with a pair of reverse tweezers while it was being heated and the embossing powder isn't the bright copper Kettle colour I'd hoped for instead it's more a bronze colour. I have a sheet of copper circle outline stickers in my stash that I've owned but not used for over ten years, these are a gorgeous bright copper so I used them to make my own backing paper, I tucked some under the heart and had others hanging off the edges which I carefully cut away so I could use them to fill in any bare parts on the edges. I added a strip of copper embossed card to the side to tie in the copper heart and stamped a with love sentiment on the bottom right hand side. The second card is an acetate reverse easel card with a dry embossed copper heart layered onto a black heart, I used 7 mini copper hearts as the stopper. I was hoping to use more copper on this card but discovered I only had a single sheet of copper foiled card stock so I had to be frugal with what I had. If you want to know how to make a reverse easel card then check out Mixed Up Craft's YouTube channel for her tutorial. It's a very easy card to make with only one fold different to a regular easel card. As I'm writing this on my phone, I shall add the photos under the main text as I can't get it to be part of the main post, some of the photos may become a little out of sequence but hopefully they should still make sense. As always if you have any questions or comments please leave them in the usual places and until next time - keep crafting! Love and crafty hugs, Sarah xx xx

Wednesday, 29 August 2018

Still sad but life goes on....

Hello crafty peeps and welcome to my crafty nook! I hope you've all been enjoying the recent hot weather, it's freezing in comparison today, in fact it's been on the chilly side all weekend. It makes a pleasant change though, so I'm not really complaining. The cooler temperatures have given me an opportunity to get some crafting done. Our neighbours got married about ten days ago and I made them a gold and black easel card, it was my niece's birthday a couple of weeks ago and my husband's birthday last week so I'll be sharing the cards I made for all three occasions. I'm writing this post on my phone and it won't allow me to add the photos within the text and I can't see in which order the photos come out in until I add the post to the blog (it just has a load of code showing instead of the photos) so the photos will follow the text like the last couple of posts. The wedding card was made using a Sizzix Thinlets die set. The cake was die cut four times out of different card and I added gold details with some thick gold paint, this paint was thinned down to add splatters to the cake and to the black card pieces that make up the easel card and topper layer. The card for my niece was made using a mermaid die set, I diecut the mermaid and coloured it in with Pro-Markers, I gave her red hair because my niece has red hair and I coloured her tail in a variety of Blues as blue is her favourite colour. I coloured the fish in rainbow colours with extra blues to make the fish numbers to nine (she turned nine). The mermaid is mounted on to a circle piece because she actually slides up from the rocks up to the fish using a slider channel. I added a uple of yellow fish to the inside along with a sentiment. The Last card I made was a floating or invisible impossible card featuring a couple of saucy corsets 😉. I made this card using an acetate sheet cut to 5"x7" and scored and folded in the usual way, I was inspired by as recent YouTube tutorial by Sam AKA Mixed Up Craft who made a couple of acetate impossible cards and it reminded me of how much I'd enjoyed making the steampunk one a few months ago. The corsets were diecut out using a couple of dies from my stash, the black layer of the red and black corset has gold speckles on it because I used some of the card I had left from making the wedding card - I try to keep all my scraps of black card no matter how small because it's hard to get a true black card of a decent GSM and I don't have a huge amount of it in my stash. I made the red card layering pieces by stamping a lips pattern in versamark ink and heat embossing them with a crimson embossing powder. The sentiment was one from my stash. I hope you like my latest makes, I'll try to add the last blog challenge which is now severely delayed soon but I really need to get my entry for the Cardmaking of the Year competition finished - I liked the wedding card so much that I've duplicated it as one of the entries, I've also half made a fence box card which I'm planning on turning into a get well card so I need to complete that and make a third card to complete the entry. The closing date is the 7th (I think!) September so I haven't got a great deal of time to complete them. Once that's completed and sent off, I hope to get on track with blogging on a more regular basis, saying that Practical Publishing magazines haven't had their Papercrafter of the Year competition announced yet and usually the two competitions overlap and that requires a project (always my Achilles heel) and two cards so that will take up quite a bit of time assuming they have the competition this year.
That's pretty much everything caught up, if you have any questions or comments please leave them in the usual places and until next time - keep crafting! Love and crafty hugs, Sarah xxxxxx